Gold Member Since 2012
Audited Supplier
Taizhou Weimin Labor Insurance Co., Ltd.

Power Supply Gas Mask, Gas Mask, Power Gas Mask manufacturer / supplier in China, offering Power Supply Silicone Gas Mask (8800A), Good Industry Cheap Dust Mask (9500B), PC Lens Protective Face Mask (304) and so on.

(/ )

Supplier Homepage Product Gas mask Power Supply Silicone Gas Mask (8800A)

Power Supply Silicone Gas Mask (8800A)

FOB Price: US $8.9-9 / Piece
Min. Order: 3,000 Pieces
Min. Order FOB Price
3,000 Pieces US $8.9-9/ Piece
Get Latest Price
Port: Ningbo, China
Production Capacity: 300/Week
Payment Terms: L/C, T/T, Western Union

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: 8800A
  • Material: Silicone
  • Mask Type: Safe-Type
  • Trademark: YILE
  • Specification: SGS
  • HS Code: 9020
  • Mask Application: Security Mask
  • Color: Blue
  • Shape: Towel Mask
  • Transport Package: 1PC/Bag 40PCS/CTN
  • Origin: Taizhou, China
Product Description
Power supply gas mask 8800A:
For dust poof and poison gas prevention.
L Medical silicon mask: Soft and safety, good sealing. The electric-drive fan can support enough air, comfortable and large air flow
L Dust proof and poison gas prevention
Check the filter and face piece which should be intact. Make sure that the valve and device are in right position, if there is abnormal, please replace the new one.
If the cartridge is damaged, damped or users feel hard to breath or smelt the smell. Please leave the working place as soon as possible. Then replace the new cartridge for security.
Please clean the dust which covered on the cartridge. Don't us high pressure jet or water.
Cartridge installation(Before use, please choose the suitable cartridge):
Insert the cartridge as the arrows. (Cartridge selection A type cartridge is preventing the organic gas).
Dust filter 9130-1 can be installed outside of cartridge. It anti dust and can extend the cartridge life.
Push the cartridge and make sure it's lock the connector.
Battery box installation:
A) 2A dry battery
B) Alkaline cell battery
(Both two kinds of batteries can be use, but can't charge the battery in battery box)
L Don't mix different batches of battery
L Insert the batteries according the instruction, then close the cover
Two kinds of wind speed, In the initial, the air volume is 40-100L/min, It will engender different air volume, due to battery's charge and cartridge's usage time.
Please hang the battery box on the belt to avoid falling off.
Usage instructions:
1.1 Adjust the elastic band in advance.
1.2 Posit the mask under your chin with the nose-piece up.
1.3 Mold the nose area to the shape of your nose by pushing inward while moving your fingertips down both sides of the nose-piece
1.4 Put the top trap over your head, resting it high at the top back of your head.
2. Adjust the elastic band and pull from both sides.
3. The seal of the mask on the face should fit snugly, check prior to each wearing.
4. To check fit, don't start the fan, put you hand on the air inlet until you can't breath.
Data sheet:
Rated voltage
Rated Current
DC 3.6V~6.0V
AA 1.5V*4 can use about 6 hours(alkaline battery can use about 14hours)
Primeval air volume
Face piece(with cartridge) 260g, battery 105g.
Working temperature
5° C~40° C
The mask is not for use in oxygen-deficient (below 18% volume) atmospheres or explosive atmosphere.
Every 90mins, should rest 10mins to avoid battery gets hot.
Power Supply Silicone Gas Mask (8800A)
Send your message to this supplier
Miss Jessica Cai
Sales Manager
To: Miss Jessica Cai

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now